When you turn on your computer, you may get this error message: ” Reboot And Select Proper Boot Device .”
This error means that the computer or laptop can’t find a hard drive on which Windows is installed.
What do you do if restarting your computer doesn’t fix the problem what does reboot mean?
Reboot And Select Proper Boot Device
When you try to turn on your laptop or PC and Reboot And Select Proper Boot Device Error, it is one of the worst feelings.
“Is my computer broken?” is the first thing that comes to mind.
” Reboot And Select Proper Boot Device ” could mean a problem with some different things.
Most of the time, though, the fixes are simple and easy.
This error means that something went wrong during the booting process.
The Basic Input/Output System, or BIOS, can’t find a device that can be used to start up the computer.
Unfortunately, you can’t get past this error and finish the bootup process until it is fixed.
How Green Is Your Reboot And Select Proper Boot Device 2022?
Check the power cable that connects your hard drive to the wall.
Most computers use the hard drive as the primary device for starting up.
So, if there is a problem with choosing the boot device, the first thing to check is the cable that gives Reboot And Select Proper Boot Device
To do this safely, follow the steps below:
- Turn off your computer and open the case to see the hard drive.
For a laptop, this could be the back cover. For a desktop, it could be the side plate of a cabinet. - Check the power cord that goes into your hard drive.
Try taking it out and putting it back in. - If you get the same error message again, try the same cable on another computer.
You could also try to use a different power cable. - boot device not found
Set the Correct Boot Order
You might be getting the message “Reboot and choose the Reboot And Select Proper Boot Device ” because the boot order is wrong. This means that the computer is trying to boot from a source that doesn’t have an operating system, so it fails.
In the boot order, you need to give the hard disk the highest priority to fix this problem.
Let’s look at the right way to set the boot order:
Change Your Bios Default Settings
Turn on the computer and press the key that sets up your PC’s BIOS.
Often, this is the delete key.
But on some PCs, it can also be the f1, f2, f10, or Escape key.
You can see the key being talked about when your system starts up.
Reboot And Select Proper Boot Device
BIOS/UEFI Has the Wrong Drive Selected
You must check if your BIOS or UEFI recognizes your system’s boot order and hard drive.
Here, you can check to see if the hard drive is the first thing your PC connects to when you load your operating system Reboot And Select Proper Boot Device
If it’s not a problem with the connection, check to see if the BIOS is set to the correct drive.
how to reboot a computer
Fix Windows Start-Up
You can try two more solutions if you fix problems with the BIOS or if there were no problems with the BIOS and boot order, to begin with, Reboot And Select Proper Boot Device
Wipe out your RAM
- Unlock the clamps that are holding your RAM in place and slowly pull them off.
- Dust off the RAM with the soft cloth and put it back into its slots.
- Put them in place with clamps, turn off your monitor, and restart your computer to see if the problem is still there.
Last Words
If none of the above solutions work to fix the ” Reboot And Select Proper Boot Device ” error message, try updating your SATA drivers in Safe Mode.
If this doesn’t work, you might want to remove the CMOS battery from your motherboard, which is the memory system with errors.