Vizio tv won't turn on

Eventually, all Vizio TVs have the same problem: They won’t turn on at all.

There are many Vizio TV owners who say they’ve had this problem. Some say they’ve been dealing with it for years.

As a good thing, there is a simple fix that should work for about 80% or so of Vizio tv won’t turn on


The Vizio TV won’t turn on.

This will help if your Vizio TV doesn’t work.
Make sure your TV isn’t plugged in for a full 60 seconds before you do this!
Afterward, plug your Vizio TV back in.
This will soft reset your TV, and it should be able to power back on without a hitch.

Remove the Vizio TV from the wall.

Vizio TVs that don’t work can be fixed by unplugging them from their wall socket. This is the most common way to get the TV to work again.

The most important thing here is to wait the full 60 seconds, not just a few seconds.
Be patient and make sure it has been at least a minute before you plug it back in.

When the TV does this simple thing, it can “soft reset” itself.
This isn’t the same as switching the remote on and off. This is very different!

Plug the TV back in, and it should start right away.

In about 80% of cases, this fix should work. The rest of the time, it can be a little more difficult.
If you’re still having trouble getting your Vizio TV to turn back on, check out the solutions below.

Remove the batteries from the remote control for Vizio to make sure it works well.

If unplugging and re-plugging your TV didn’t work, try taking out your remote’s batteries to see if that helps.

Make sure to take both batteries out of the remote completely before you turn it on or off.


Vizio’s TV can be factory reset to get it to work again.

You should be able to turn on the TV by unplugging it or taking out the remote battery. Then, click the Menu button.

“System” should be in the menu. If it isn’t, look for “System.”

“Reset & Administration” and “Reset TV to Factory Defaults” are on the next page, so look there.
Sometimes, the Vizio TV will ask for a code before it can be turned off.
If it does, the default code is 0000.

This will bring your Vizio TV back to the settings it had when you bought it.


Without a remote, you can factory reset your Vizio TV and get it back to the way it was

If for some reason you don’t have your TV’s remote, you can still factory reset your Vizio TV and get it back to how it was.

Find the power button on your TV to do this.
The right-left, or bottom of the device may have this on it. It depends on the model you have, but it could be there.

It’s best to do this while your TV is on, so you can press and hold down both volume and source at once.
Soon after, your TV will tell you to press and hold the input button for a while.


It is time to move the power cord behind the Vizio TV.

It might also help if you unplug the power cord from the back of your TV.

Then plug it back in again after about 60 seconds or so.

As soon as you plug it back in, make sure the connection is strong and safe
Make sure this doesn’t move at all. A tight connection is important to make sure that the TV gets steady power.

With the power cord back in, use the TV power button to turn on the TV, not the remote!

There is a chance that you will see the TV come back to life.


It might be better to use a different plug for power.

If you haven’t had any luck up until this point, I would try plugging your Vizio TV into a different power outlet in your home.

Sometimes outlets have a short or a blown fuse, but we don’t know it because we don’t pay attention.

If you don’t want to move your TV, you could plug another small appliance into the outlet you want to use for your TV.

In this case, you know that the outlet is working because you can see the device start-up. This isn’t likely your problem.

Again, this isn’t likely to be the problem, but it’s still a good way to figure out what’s wrong. It should be quickly ruled out as a suspect.


Replacement of the power supply

Try taking the TV’s power supply out and taking it to a repair shop if nothing else works.

In order to do this, you should check to see if your TV’s standby light is on.
The power supply board may be working and this step should be skipped if this is true, so don’t do it.

If there is no power and no standby light, this means your power board is either broken or dead.
This could be caused by a power surge.

If you have a Vizio TV, it’s not uncommon for its power supply to be faulty or weak. The good news is that it only costs about $65 to fix (if you’re willing to remove it yourself).

A good tutorial on how to remove the power supply from a Vizio TV is in the link I’ve added below.


Check the Vizio TV’s warranty before you buy it.

If you can’t get your Vizio TV to turn on, you should see if you have a warranty on it.

Before they fix or replace your TV, you have to tell them what the problem is and whether or not it is covered by the warranty.

if this turns out to be covered by your warranty, they even come to your house to help you out.
Try it!


Vizio’s TV won’t work. What should I do?

Don’t be afraid, though.
If your Vizio doesn’t work, don’t worry.
You might not have a broken TV, but there are a few reasons why this might happen.
Most of the time, it only takes a few minutes and a little troubleshooting to get your TV back up and running again.

: The Vizio TV won’t turn on?

It doesn’t work with both the remote and the button on your Vizio TV to turn it on.
Because of this, it isn’t possible for an IR receiver to be the cause.

Power or system boards could be bad.

Watch out for the TV power light if you unplug and plug in your Vizio TV again.
You’re getting power if it turns on and off very quickly. Most likely, your system board is to blame for this.

You might have a bad power board if it doesn’t turn on and off quickly.
When you unplug or plug something in, look at that light to see if it changes.

If you have both of these problems, you’ll need to take your TV apart to fix them.
You need to get both the etched board model number and the sticker model number from your power board or your system board. Then, you need to buy the exact same thing.

Vizio TVs of the same model can have different parts due to changes in the product, so it’s important to get an exact match.


Last Words

As we said before, there could be a lot of reasons why your Vizio TV won’t turn on.
There may be a problem with the TV’s internal parts if it doesn’t turn on even after you’ve tried all the steps above.
This is a technical problem, and you might need to call a tech to disassemble and fix it.

Leave a Reply

Your email address will not be published. Required fields are marked *